ZenPlug User Guide
1. General ZenPlug setup and tips
2. How to setup the App (further down)
3. Link to Apps
1. General ZenPlug setup and tips (Text below)
2. Setting Up Your ZenPlug Diffuser Using the Bluetooth App
3. Link to apps - click here
Text overview for those who prefer reading
1. General ZenPlug setup and tips Text
1. Turning On the Diffuser 0:00
-
Press and hold the mode button to turn it on.
-
The mode button (top button) controls intensity:
-
Green: Least intense
-
Red: Most intense
-
2. Setting Up the App 0:25
-
Use the app to set up to 30 seconds of spray on blue mode if red isn't intense enough.
-
Schedule your diffuser for the week to save on oils when you're not home.
3. Setting the Timer 0:35
-
The time button (second button) controls how long the diffuser runs:
-
Green: 1 hour
-
Red: 8 hours
-
4. Adjusting the Night Light 0:46
-
To turn off the night light, press and hold the time button.
-
The night light uses a light sensor; cover the dot at the bottom with your hand to check.
5. Ensuring Proper Airflow 1:06
-
Place the diffuser in a space with good airflow.
-
Avoid blocking it with furniture or shelves.
6. Troubleshooting Issues 1:26
-
If the diffuser isn't working:
-
Ensure the diffuser head is correctly positioned (nozzle away from the wall).
-
Check for oil residue buildup and clean with diffuser cleaning solution.
-
7. Cleaning the Diffuser 1:57
-
Remove oil from the container using a decanter.
-
Pour about a third of the cleaning solution into the bottle, reattach the head, and run for about an hour.
8. Checking Connections 2:17
-
Ensure the straw is firmly pushed into the diffuser head.
-
Check that the diffuser head is pushed down properly.
-
Verify that there is power to the diffuser by trying different plugs.
9. Reducing Noise 2:37
-
Use the included foam support to reduce vibrations.
-
Ensure the bottle is properly tightened to prevent air leaks.
10. Testing the Diffuser 3:05
-
You can restart the cycle by pressing the mode button to check if it's misting.
-
Do not add water to the diffuser; it is designed to be waterless.
11. Using Oils Effectively 3:12
-
Start with a lower intensity and gradually increase.
-
Set a schedule on the app to avoid wasting oils when not at home.
Link to Loom
https://loom.com/share/c66061916c074674b267b3926ea36f30
2. Setting Up Your ZenPlug Diffuser Using the Bluetooth App Text
1. Plug in Your Zemplug Diffuser 0:00
-
Plug your Zemplug diffuser into a socket.
-
Click through the mode settings until you reach the blue setting.
2. Download the Sent Tech App 0:12
-
Download the Sent Tech app on your smartphone.
3. Connect via Bluetooth 0:26
-
Open the app and click the plus sign (+) in the top right corner.
-
Ensure Bluetooth is enabled on your phone.
-
Make sure you are close enough to the diffuser for it to show up in the app.
4. Select Your Diffuser 0:43
-
Look for your diffuser in the list of available devices at the bottom.
-
Tap on your diffuser to connect; you will hear a beeping sound indicating a successful connection.
5. Check the App Interface 0:58
-
Observe the app interface showing the time, day, connection status, and running status.
6. Set Working Mode 1:08
-
Click on 'Working Mode' to select different modes.
-
Set the desired operating hours (e.g., 7 AM to 10 PM) and select the days of the week.
7. Configure Frequency and Stop Time 1:31
-
Set the frequency time (how long the diffuser runs) and stop time (pause between sprays).
-
Example settings: 30 seconds running time and 60 seconds stop time.
8. Save Your Settings 1:48
-
Press the tick arrow to save your settings; you will hear a beep confirming the save.
9. Confirm Connection Status 1:54
-
The blue light on the diffuser indicates it is connected to the app.
-
Once you exit the app, the light will turn off, but the diffuser remains connected.
10. Rename Your Diffuser 2:07
-
Change the name of your diffuser for easy identification (e.g., rename to 'Dining Room').
11. Finalize Setup 2:29
-
Exit the app; the light will stop blinking, indicating the setup is complete.