MistMini User Guide

Troubleshooting MistMini Misting Issues

 

1. Check Proper Seating 0:00

• Ensure the Miss Mini is seated properly.

• If it beeps, it may be tilted; adjust it to the correct position.

 

2. Inspect the Ball and Blockages 0:06

• Turn off the device and check if the ball is tightly secured.

• Look for any blockages on the outside and inside holes.

 

3. Check the Straw Tube 0:48

• The straw tube may have a blockage that is not visible.

• Remove the straw and inspect it for any obstructions.

 

4. Replace the Straw if Necessary 1:12

• If you have a replacement straw from the original kit, use it.

• If not, purchase a new straw from the store.

 

5. Inspect the Rubber Seal 1:27

• Use a knife to check if the rubber seal is inside the head.

• Be cautious while handling the knife.

 

6. Replace the Seal if Worn 2:10

• If the seal is worn or loose, replace it with a new one.

• Ensure the new seal is seated correctly.

 

7. Reassemble the Device 2:44

• Put the straw back in and tighten it.

• Add your preferred oil (e.g., Ancient Dragon scent).

 

8. Test the Device 3:08

• Turn on the Miss Mini to check if it is misting properly.

• Confirm that mist is being produced.